Add: Jin Tai Lu Dong, Jining Jinxiang County Economic Development Zone, Shandong Province, China
Contact: Li Guopan
(1) check whether all the components of the hydraulic system are connected correctly before running, and add the oil to the specified height by the filter.
(2) start and run for 10~15 minutes under no load condition, and exhaust, fuel tank has foam, system noise, and motor cylinder stagnation, which proves air in the system.
(3) after removing the air, fill up the tank and start increasing load to the motor until the highest load, and observe whether there are abnormal phenomena, such as noise, oil rise and oil leakage.
(4) change the oil after 50 hours operation, and then replace according to the maintenance rules.
(5) if a non motor failure, please do not disassemble easily.